The first matter you need to do is make sure that the ribbon you are looking at is well-matched with the card printer simulate that you have. Ribbons are not normally standardised between manufacturers so you will want to know the make and model of the printing machine that you are using. Manufacturers such as Fargo, Evolis, Zebra and Magicard cater producer produced ribbons well-matched with flow simulate printers as well as interrupted models.
The ribbon type needful is based on the capabilities of your printing machine and the card output that you are lacking. Single sided printers ordinarily use the YMC, YMCK and YMCKO publish ribbons. A printer that prints both look and back side of an ID card commonly uses a YMCKOK print ribbon.
YMC publish ribbons print full distort cards with a composite melanise print. The colour options are the card are wide as the intermixture of the Y, M and C panel colours will produce a throng of colors. This typewriter ribbon will not do well if you need a bar code written on the card. The typewriter ribbon does not contain a pure melanise panel that provides a true, sharply melanize color. This ribbon produces nigrify by a intermixture of Y, M and C. This typewriter ribbon is used for ID card printers that have a lamination module. The lamination unit provides the O stratum necessary to seal the card in a split practical application on the card. The O level is necessary to protect the card from fade or scrape.
YMCK ribbons are similar to the YMC ribbon with the addition of the K panel. Full color is provided by the YMC panels. This K impanel is the rosin nigrify empanel needed for true melanize barcodes and other text. This typewriter ribbon is also used for printers with the separate lamination unit with the part O empanel.
YMCKO print ribbons contain full color, resin melanise and as overlie panel in one ribbon. This single sided publish ribbon will cater a sharply unrestrained card with a true blacken publish. The O impanel is concerted with the publish panels and provides the thin stratum overlay requisite to help protect the card rise.
YMCKOK print ribbons contain full tinge, rosin nigrify, overlie impanel and an additive rosin blacken empanel. These ribbons are used for dual sided printing process. The look of the custom ID badges is written in full distort, rosin melanize with the overlie panel. The back of the card is then printed with the resin nigrify allowing for bar codes and other text an organization may want on the back of the card.
Knowing a bit about the ribbons helps those who are trying to reorder ribbons for their pic identification card printing machine system of rules. Additional help is available through ID card experts at integrators base online.